bing tracking image
  1. RV Steps
  2. Lippert
  3. Pull-Out Step
  4. Towable Camper
  5. 4 Steps
  6. 24 Inch Wide Step
Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum
Lippert

Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum

Part Number: LC432698
In Stock
$474.46
RV Steps
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This 8-1/2" deep, quadruple manual pull-out step adds a sleek, euro-style look to your RV. Steps are constructed of lightweight, rustproof aluminum and the linkages and frame are made of strong steel. Anti-slip design offers excellent traction. Great Prices for the best rv steps from Lippert. Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum part number LC432698 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (219)
  • Q & A (0)
  • Photos

Lippert RV Steps - LC432698

Highlights

  • Step in with confidence: Anti-slip aluminum treads and rubber strips give secure footing in wet or muddy conditions.
  • Handles tall entries: Works for 36-3/4"–39-3/4" entry heights with 8" drop/rise between steps.
  • Light but tough: Rustproof aluminum steps and a powder-coated steel frame support up to 300 lbs.
  • Simple to use: Pull out to enter, push back in for travel—no power or complex setup needed.
  • Fits standard mounts: 28" wide × 16" tall × 12" deep bracket, holes 26-3/4" wide × 7" deep (on center).
  • Clean, modern look: Sleek euro-style design complements newer RV exteriors.
Made in USA

Features to know about

Easier Entry for Tall Campers: Four Steps with 8" Drop and 24" Width

The Alumi-Tread Manual Pull-Out Step gives you a natural, comfortable climb into taller rigs. It has four steps with an 8" drop/rise and fits entry heights from 36-3/4" to 39-3/4". Each step is 24" wide and 8-1/2" deep, so it feels like walking up real stairs instead of climbing a ladder. The extra step makes a big difference for anyone who struggled with the gap on a three-step setup.

Stable Footing in Any Weather: Textured Aluminum Tread with Rubber Grips

Each tread has a textured, anti-slip surface and rubber strips that keep your footing secure in wet or muddy conditions. The aluminum platforms are rustproof and stay looking clean after years of use. With a 300 lb weight capacity, the steps feel solid underfoot and don’t flex when you’re carrying gear, groceries, or helping someone up.

Smooth Operation and Easy Use: Lightweight Design with Grab Handle

The lightweight aluminum construction makes pulling the steps out and folding them back in smooth and easy. A built-in grab handle keeps your hands clear of moving parts and gives you more control when extending or retracting. The 28" wide steel frame and linkages are powder coated for corrosion resistance and long life.

Built for Everyday Travel: Strong Steel Frame and Compact Fold-Under Storage

These steps bolt securely to a 28" wide mounting bracket that tucks neatly under the doorway when stowed. The steel frame and linkages add strength without adding bulk, so they hold up to frequent use on the road. When folded up, they stay out of the way for travel and keep dirt outside where it belongs.

Specs

Entry Height

  • Entry height: 36-3/4" - 39-3/4"

Measurement diagram showing how to determine RV entry height for choosing correct Lippert Alumi-Tread step model

Step Dimensions

  • Step dimensions: 24" wide x 8-1/2" deep
  • Drop/Rise: 8"

Technical dimension diagram of Lippert Alumi-Tread Manual Pull-Out Step showing measurements for step width, depth, and mounting bracket size

Side view technical drawing with dimensions for Lippert Alumi-Tread quad step showing height and spacing measurements

Mounting Bracket Dimensions

  • Mounting bracket dimensions: 28" wide x 16" tall x 12" deep

Diagram of Lippert Alumi-Tread step assembly with measurements showing folded and extended positions for installation reference

Weight and Capacity

  • Weight capacity: 300 lbs

Warranty

  • Warranty: 1-Year warranty


Entry Height25-1/2" Mounting Bracket Width25-3/4" Mounting Bracket Width27-1/2" Mounting Bracket Width28" Mounting Bracket Width
14-1/4" - 17-1/4"Not availableLC432678Not availableNot available
21-1/2" - 24-1/2"LC432682Not availableNot availableNot available
24-1/2" - 27-1/2"Not availableNot availableLC432687Not available
31" - 34"Not availableNot availableLC432696, LC432690Not available
36-3/4" - 39-3/4"Not availableNot availableNot availableLC432698

Diagram showing how Lippert Alumi-Tread steps mount under an RV with indicated bracket positions and spacing requirements

Technical image of Lippert outriggers metal brackets used to extend mounting support for RV step installations

432698 Lippert Components (LCI) Alumi Tread Hybrid Aluminum and Steel RV Step 358991 - Quad





Customer Satisfaction Score:

Ratings & Reviews

4.7

219 reviews
Review sort icon
This 8-1/2" deep, quadruple manual pull-out step adds a sleek, euro-style look to your RV. Steps are constructed of lightweight, rustproof aluminum and the linkages and frame are made of strong steel. Anti-slip design offers excellent traction.

by:

The steps fit perfectly below our door replacing the fixed ladder from the dealer. We needed the folding steps to access our 5th wheel when it is stored in our garage.



by:

Some damage to the product noting it had obviously been opened before. Unfortunately, this step does not fit my application so we had to order a step made by a different manufacturer. I believe it would be beneficial to add a little more about fitment and measurements on the product description. The installation video seemed to indicate that my change from a 3 step to a 4 step pullout was essentially a bolt-in. Not so as the 4 step uses a wider flange that was not compatible with my trailer. I was compelled to order a Tork Step. I like the construction of the product but it doesn't matter much if it will not fit. Etrailer customer service was very good!



by:

These 4 steps are just what we needed to replace the 3 steps. The 3 steps were too wide apart. We were able to install the new 4 steps fairly easily. They fold up nicely and look great. The fourth (last step down) does not have as much support as the other three steps. Although the fourth step appears to be sturdy enough, we may build a wood platform for the fourth step to rest on to add additional support. Other than that, time will tell if these steps hold up to the traffic of going in and out of our 5th wheel RV.



by:

I had an "accident" with the steps on my fifth wheel. Next time I will remember they need to be in the stowed position before I pull it out of its garage. Nicole at etrailer was able to identify the only replacement that will fit as the original steps were no longer available. I had the new ones in 2 days and they are a perfect match. I like the aluminum tread over the painted steel of the prior steps. They were loosing paint and showing their age. Also, I think with the aluminum they are a bit lighter but are just as sturdy. I would like to say installation was easy but they are still heavy. I was able to do it by myself with the help of a floor jack. Hopefully this is the last time I will need to replace a set of steps. If I do I will call etrailer first.



by:

During the past year it has much easier entering and exiting my rig. No matter the the type of camp site or leveling position of my 5TH wheel. there has been NO need for extra steps. Great purchase and glad I did.



by:

The steps are definitely worth the cost, at least for us. They arrived promptly without damage to the steps themselves but the box they were in was pretty beat up. It was a pretty tight fit installing them but the RV technician got the job done. They look and work great! The only reason I didn't give them a five star is because the bottom step there is a little more give or flex in them than what I was expecting. The video I watched I didn't pick up on that aspect of them. By the way, the video I watched where you use the floor jack for instillation was great! That trick was really helpful!
Over all we are really happy with them and the service you provide!!



by:

Worked great, used it for a church bapt istry



by:

My new rv came with a pull down solid step. Thought I’d really like it but it’s not for me. Replaced it with this awesome aluminum 4 step fold out.

Ken profile picture

Ken

6/7/2019

Love it



by:

These steps were what we needed for our Travel Supreme Rally Sport Toy Hauler. The factory steps were a little short and we had to either step high for the first step or use an alternative means of a fourth step.
Had to modify the top mounting holes, and add an l-angle bracket to support the back side of the new steps, but the wife is happy.
May purchase another set for the rear door.



by:

5 stars all day long. We purchased these steps because we didn’t like the Moryde step that fold up into RV doorway that came with RV. That style was just not for us. These new steps are very sturdy and exactly what we wanted. Keeping the steps and dirt outside the RV. And no more adjustment needed when using original drop down steps. The instal was easy. A few measurements and cut out the skirting and the new steps fall into place. Should have done it sooner. Thanks etrailer for having all the information and parts to do any RV job.



by:

The steps arrived on time and it took less than an hour to install them. We replaced a three step version with this four step version and my wife says it makes the entry much easier. Easy to use and look good.



by:

Great steps, they are a huge improvement over the stock ones that came with our Voltage TH. This is the second set we have installed and installation is fairly easy. They don't rust like the originals, they provide decent traction when wet and our puppy does not get his claws caught on anything like he did on the OEM ones. Additionally, they are lighter and so much easier to operate. The free shipping and price moved this project to the top of our to do list!

Randy T. profile picture

Randy T.

2/24/2019

Doing well at 1 year. They still move easily and the finish is holding up nicely.



by:

Quad step fit perfect on my 2018 Grand Design 31'Reflection. Replacement for my old 3 step which was a Lippert as well.Quad step is much easier to walk up than the 3 step. The lower 4th step makes a big difference!



by:

These steps work great on my travel trailer, easy to put on and great to use



by:

I originally ordered some steps that we decided wouldn't work. I contacted etrailer and they were able to cancel my order before it shipped. I was able to order these. They were priced well, were shipped promptly and we received them in good condition.

James profile picture

James

3/21/2025

We replaced the factory fold in steps with these and they are great and keep any mess outside. I would do it again in a heartbeat

Robin H. profile picture
Etrailer Expert

Robin H.

3/21/2025

@James glad to hear it!


by:

We have a 2021 Momentum 349M. The main door had pull down stairs that tucked inside when on the road. We discovered that we did not like them. WE installed this and LOVE it. It is so much easier to get in and out of the RV, easy to install.



by:

After our road mishap that bent up our old stairs and brackets, we were able to drill a few holes and bend the brackets back as close as possible and install the new stairs. They are sturdy and better than our old ones. We have been vey happy with them. Friends have commented how good they are. We spend 4 months living in the 5th wheel in Arizona.

Brooke M. profile picture
Etrailer Expert

Brooke M.

4/15/2025

What time of year do you stay in AZ? I was there for a few months from January through April one year. Absolutely lovely state!

George profile picture

George

4/15/2025

@BrookeM we are there December through March. We’ve been doing that since 2013
Brooke M. profile picture
Etrailer Expert

Brooke M.

4/22/2025

@George Wow that's awesome! Do you visit all over the state while you're there?


by:

Really good looking product. Install was easy. Loke the added step and spacing on these steps. Makes entry and exit from RV a lot easier. 2011Bighorn 3185RL

David R. profile picture

David R.

8/4/2018

Still working great..



by:

Excellent Product and well built. Installed on a Fire Truck to provide ready access to a large storage cabinet. (See attached Picture) We tested with one of our relatively beefy fireman in full turnout gear. I bolted the top bracket to bottom of box, added (3) 1 1/2" x 1 1/2" braces from back of frame to truck frame. Super sturdy, folds easily out of way. (see attached Pic)



by:

Replaced original heavy steps on our 2015 Cedar Creek Hathaway fifth wheel. The stairs fit perfectly into the existing space and bolt holes. Shipping was quick, item was packed well. The only problem was no hardware included ?? we re-used the old stuff.

Victoria B. profile picture

Victoria B.

2/28/2020

These steps do not come with the mounting hardware included. It is available separately as part # LC118155-72.



by:

Needed this quad step after lifting my fifth wheel trailer 6". The shipping box arrived with a few holes in it from the bottom bracket of the step frame rubbing in transit or from loading. I was hoping that none of the parts slipped out as that would have been a bummer. After opening the box, I found that the instructions and any mounting hardware were not in the box, if supplied? I went to the e-trailer web site and found that the instructions for installations were not yet available and Lippert web site did not have any instructions posted. No big deal as the mounting points were that same as my factory step on the trailer. after removing the old steps, I placed the new steps up to the factory mounting bolts and found that the new frame was 1/4" to far apart. I decided to pull the front corners of the frame in to fit the factory mounts, as they were installed in the floor of the trailer and could not be relocated. After pulling the frame in, i was able to bolt the front frame mount to the trailer. I needed to pull the rear of the step frame in as well to use the factory side mounting brackets. Overall, it took my about an hour and a half to install the step because of the fitment issues. The steps are secure, fold in and out with ease and feel very sturdy entering and exiting the trailer. After the fitment issues and pulling the frame in, my only concern was that the center top race was bowed down due to the compression. Other than how the brace looks, it dose not hinder the use of the steps.
Without the instructions, I made it fit.



by:

Disappointing compared to the old solid steel Lippert 4 step setup. Each step flexes and bounces as you step on them and it gets worse as you go down the steps. I still have the solid steel model Lippert 4 step at my back door. They’re 12 years old but are solid and sturdy. In addition the rubber strips that are on each aluminum step continuously separate from the groove and have to be reinserted. You will see reviews from folks moving from the 3 step to this 4 step model and they’re happy with them. I can understand why but if you already have the old solid steel 4 step you’re probably not going to be happy with this one. Just my opinion. To mitigate the flexing and bounce I added a step support using magnets. It helps some. If I had it to do over again I would try the solid steps that fold up into the camper.



by:

Had to replace the original steel (quad) steps on my 16 Cardinal. I don't believe Lippert still makes the Quad steel with rounded edges any longer. Ordered these and they were an exact fit with no modifications or additional hardware necessary. Ordered on a Monday, arrived Wednesday, installation done in less than an hour. Etrailer is awesome!

Richard profile picture

Richard

2/23/2024

Still working perfectly! The old steps were so hard to pull out and push back in. These can be done with 1 finger! No rust or any issues whatsoever! I really wish Id swapped them out sooner. While I know many folks may like the style that folds up inside the unit, I prefer these so it is easier to get in and out of the trailer when it is parked for storage.



by:

Great product easy installation



by:

ETrailer was easy to do business with and the steps were delivered sooner than expected exactly as advertised
The steps are exactly what we wanted. The installation was a bit of a job because our cedar creek steps were 27" wide and these are 28" so had to move one of the mounting brackets but I knew this going in. Once I got the bracket moved they went on easy. The reason for replacing the steps were twofold first the original steps treds were 9" apart and only 3 steps. Second they were the slide in type which was hard to operate mdw is a petite lady and she could not operate them she is also vertically challenged so the 9" step was uncomfortable
With the new 4 step steps they are only 8" step and they fold in very easy for storage. mdw is very happy with the new steps.
They also look very nice

Frank D. profile picture

Frank D.

3/6/2018

We have had these for about a year and We Love them one of the best upgrade we have made to our 5th Wheel mdw loves them she can fold and unfold without any issues at all we would highly recommend these steps


25
25

See what our Experts say about this Lippert RV Steps

  • Can 28 inch Wide 4-Step RV Steps Replace 27-1/2 inch Steps on RV
    The RV steps do get a bit wider as you add more steps to them. The closest option we have is the Alumi Tread part # LC432698 that you referenced which would be 28 inches wide. For basically all RV applications you can still install the steps but you'd have to move the brackets out or remove and install new ones. For new brackets we have the outriggers part # LC301704 which would work well.
    view full answer...
  • Mounting Hardware for Alumi-Tread Manual Pull-Out Step for RVs on 2017 DRV Mobile Suites
    Hi Darwin; the correct mounting hardware for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 is the # LC118155-72. This includes four 3/8"-16 x 1" grade 5 carriage bolts and flange nuts.
    view full answer...
  • Will the Brophy Camper Scissor Steps # AS24 Fit a 2012 Raptor Velocity
    Since trailer manufacturers don't typically keep a record of the exact stairs that they install on any given trailer the best way to know if the Brophy Camper Scissor Steps # AS24 are compatible with your 2012 Raptor Velocity is to take some measurements. The Brophy steps have an adjustable height of 31" - 39" when they are expanded and the step dimensions are 24" wide x 8-3/4" deep x 1-1/2" thick. They have a weight capacity of 300 lbs and come with a 1-year warranty. Please note that...
    view full answer...
    Image 1 for Image 2 for
  • How to Tell if the Pull-Out Step for RVs # LC432698 Will Fit a 2014 Cedar Creek 38CK 5th Wheel
    Most aftermarket RV steps will replace the OEM steps without modification. The same is the case for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 that you referenced. These steps do have a weight capacity of 300 lbs so they are pretty sturdy. I am attaching some photos that give the different dimensions of this step. You can use these to compare them with your current steps and brackets for fitment. If they happen to not have the same mounting dimensions you can always have the...
    view full answer...
    Image 1 for Image 2 for
  • Can 3-Step RV Stairs be Replaced with Quad Step
    Your current steps can be replaced with quad steps like the Lippert Alumi-Tread # LC432698 as long as you have enough room between you trailer and the ground. The Alumi-Tread install into bolt holes that are 26-3/4 inches wide and 7 inches deep apart. They will reach about 30 inches from the mounting bracket to the top of the bottom step.
    view full answer...
    Image 1 for
  • Will The 4-Step Alumi-Tread Manual Pull-Out Steps # LC432698 Fit a 2017 Keystone Avalanche?
    If by the opening you are referring to the cutout in the J-Pan then the Alumi-Tread Manual Pull-Out Step # LC432698 may still fit on your 2017 Keystone Avalanche. You will want to measure your current frame for your steps and look near the top of the steps to ensure you have enough room for the 28" wide frame. Since the steps are narrower than the frame they will fit through the 27-7/8" opening in the J-Pan for use. I have no way to lookup what your Avalanche came with from the factory...
    view full answer...
  • Brackets Needed To Mount Lippert Pull-Out RV Steps To A Wooden Storage Space
    Hey Steve, Steps like the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 are attached directly to the frame using the side brackets. These have a bunch of pre-drilled holes in them to attach to the frame of the RV from below. If you're wanting something a bit sturdier then you can pick up some relocation brackets # LC301704, which would mount to the sides of the step brackets and have a much larger lip to secure to the underside of the wood platform.
    view full answer...
  • Recommended 4 Step Rv Steps Measuring 26 Long X 8-/12 Wide
    The RV steps that we have closest to your measurements are the Alumi-Tread Manual Pull-Out Step for RVs part # LC432698. These steps have a mounting bracket dimension of 28" wide x 9-1/2" deep and can support up to 300 lbs. of weight. I have included a review video and picture with the above dimensions listed for you.
    view full answer...
    Image 1 for
  • RV Step Recommendation Where Mounting Bracket is 27-1/2 inches in Width
    Are measurements are not like lumber measurements that round up. If the overall width of your existing steps is 27-1/2 inches then the Manual Pull-Out Steps # 953240RFALC1 are going to be the best option.
    view full answer...
    Image 1 for
  • How to Correctly Measure for Trailer Steps
    In order to find the correct fit, you are going to have to do a little measuring. You will want to start by measuring the width of your current step assembly, followed by the height from step to step. After that, you will want to measure from the center of the step assembly at the crossbar to the diagonal line at edge of the bottom stair. For example, the Lippert Manual Pull-Out Step, # LC432687, has three steps and measures seven inches at the bottom two steps, has a stair assembly width...
    view full answer...
    Image 1 for Image 2 for
  • Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon Rover
    To find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
    view full answer...
  • Recommended Lippert Quad Step to Match Part Number 358991 on Grand Design 351M
    The quad steps you are looking for are the Lippert Alumi-Tread Manual Pull-Out Step for RVs # LC432698. These steps are 24 inches wide and have an 8-1/2 inch rise. From the top of the mounting bracket to the bottom of the step you will have a total run of 49-5/8 inches. The mounting holes are 7 inches on center deep and 26-3/4 inches wide. The outer mounting dimensions are 9-1/2 inches by 28 inches. If the mounting holes do not line up, you can use the Lippert Outriggers for Manual...
    view full answer...
  • How Do RV Step Outriggers Install
    Outriggers such as # LC301704 bolt to the sides of steps such as # LC432698. The outriggers will bolt to the RV frame. For hardware to attach the steps to the outriggers use # LC118155-72. The specific location and orientation of the outriggers depends on the RV/trailer. There isn't one set way they would have to be installed. And some applications do not use the outriggers. The installation of the steps is as follows: 1. Ensure step is completely back up against the step supports on...
    view full answer...
  • Do Lippert Alumi-Tread 3-Step and 4-Step Use Same Bolt Pattern
    You can replace your Lippert Alumi-Tread Triple Steps # LC432696 with the Alumi-Tread Quad Steps # LC432698 on your trailer as they do have the same bolt pattern. The quad steps have a total entry height of 30-3/4" as you can see by the accompanying photo, which is 6-1/4" more than the triple steps.
    view full answer...
    Image 1 for
  • Best Replacement for Lippert Radius Quad Steps 432693
    The best option we have to replace the Lippert Radius Quad Steps 432693 is with the Alumi-Tread Manual Pull-Out Step part # LC432698. I spoke with Lippert and they stated this is the only available replacement for the discontinued model. Please note, the Lippert Radius Quad Steps 432693 use an oddball 28" wide mounting bracket so you'd need to cut and reweld the outrigger in order to be able to mount anything else like the TorkLift GlowStep Revolution Scissor Steps part # TLA8004.
    view full answer...
  • What Hardware is Needed to Install Alumi-Tread Manual RV Steps # LC432698
    To install the Alumi-Tread steps # LC432698 you will need four 3/8"-16 x 1" grade 2 bolts and 4 matching nuts. Two self-tapping 1" x 1/4" screws will also be needed if using step support brackets. Hardware is not included. Lippert's installation instructions are as follows: Take off the existing step by removing the lag bolts, which secure the step to the floor, and the step bolts from the outriggers. NOTE: If the existing step has a support bracket, remove the screws securing the step...
    view full answer...
  • Replacement Steps for Flagstaff Super Lite 8538BHWS
    In the review video (3:25 minute mark) the bracket attached to the step measures just over 27-1/2". The bracket on your trailer should be getting close to 28" wide to make that work. It seems like a lot of work, but you might also consider taking the trailer mounting frame off and using the Lippert # LC301704 metal outriggers in thier place. Since the trailer mounting brackets are 27" you will need steps that are smaller that that. Finally, the simpilest solution would be the using...
    view full answer...
  • Lippert Components Alumi-Tread Quad Steps Measurements
    The Lippert Components Alumi-Tread Manual Pull-Out Step for RVs - 8-1/2" Drop/Rise - 24" Wide - Quad - Aluminum # LC432698 is 28 inches at it widest at the mount. The mounting holes are 26-3/4 inches apart. The actual steps are 23-7/8 inches wide. I've attached some images to assist. If the opening is similar to most 5th wheel trailers, then the mounting frame is behind the opening and this set of steps will work.
    view full answer...
    Image 1 for Image 2 for
  • Can Lippert 3 Step Tread Lite part # LC293661 be Replaced by Alumi-Tread # LC432698
    Yes, if you wanted to replace your Lippert 3 Step Tread Lite part # LC432696 with the Alumi-Tread Manual Pull-Out Step # LC432698 that you referenced you certainly could as the mounting dimensions and brackets are the exact same.
    view full answer...
  • Fit of Lippert LC432698 Alumi-Tread RV Steps on 2011 Wildcat 302RLS 5th Wheel
    The Lippert # LC432698 steps you mentioned are designed to replace steps with a 28 inch mount, so they'll be a good fit. The steps have an overall height of 30-3/4 inches, measured as shown in the provided photo which also shows other dimensions. You can see a product demonstration video by clicking the provided link. # LC432698 is the current model of the # 358991 RV steps.
    view full answer...
    Image 1 for
  • Determining The Correct Replacement RV Steps For A 2015 Keystone Montana 3155RL
    There isn't a guide to tell us the correct replacement steps for your Montana so we'll need to do a bit of measuring first to determine the correct replacements. For pull-out steps you'll need to measure the width of your current mounting brackets and the the entry height (ground up to the mounting brackets). The Alumi-Tread Manual Pull-Out Step for RVs # LC432698 you were looking at has a 28" wide x 16" tall x 12" deep mounting bracket dimensions and fits an entry height of 36-3/4" - 39-3/4"....
    view full answer...
    Image 1 for
  • Can a Single Step be Added to a 3-Step System
    If you already have a 3-step on then you will need to replace the entire assembly with a 4-step like the part # LC432698 that you reference. I do not know of any step systems that allow you to add or take away a step for your application. I have attached a review video and pictures with dimensions on them for you to reference as well.
    view full answer...
    Image 1 for Image 2 for
  • Replacement RV Steps w/ 8 Drop/Rise
    I understand the need to lessen the drop/rise. If you are okay with bottom step setting close to or possibly against the ground then the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum, # LC432698, should work for you. Another option with an 8" drop/rise is the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Triple - Aluminum, # LC791572. This has legs at the bottom of steps that are adjustable but the others have that wanted...
    view full answer...
  • How to Determine Correct Replacement Steps fora 2010 Jayco Eagle 5th Wheel Trailer
    Knowing the width of your steps is a good place to start when looking for replacement steps for your 2010 Jayco Eagle. The next thing you will need to do is determine how far it needs to drop. For example, the Lippert Alumi-Tread Manual Pull-Out Step # LC432698 drops 29-3/8" from the top of the installation brackets to the top of the bottom step. I have also attached photos of the dimensions for the mounting holes and the steps when they are folded up. You will need to use these to make...
    view full answer...
    Image 1 for Image 2 for


< Previous



Do you have a question about this RV Step?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Kathleen M
Updated by:
Kathleen M
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Cole B
Installed by:
Cole B
Employee Steven C
Installed by:
Steven C
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Written by:
Chelsea B
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.